This article provides a comprehensive guide to the First Alert Smoke and Carbon Monoxide Alarm, including installation, setup, and troubleshooting. The First Alert Smoke and Carbon Monoxide Alarm is a combination alarm that detects both smoke and carbon monoxide, providing an early warning system for potential fires and carbon monoxide poisoning.
The First Alert Smoke and Carbon Monoxide Alarm is designed for use in single-family residences and is not intended for marine or RV use. It is essential to read the manual carefully and follow the instructions to ensure proper installation and operation of the alarm.
Installation
When installing the First Alert Smoke and Carbon Monoxide Alarm, follow these guidelines:
- Install the alarm on every level of your home, including finished attics and basements.
- Install the alarm inside every bedroom.
- On a peaked, gabled, or cathedral ceiling, install the first Smoke/CO Alarm within 3 feet (0.9 meters) of the peak of the ceiling, measured horizontally.
Setup
To set up the First Alert Smoke and Carbon Monoxide Alarm, follow these steps:
- Turn off the AC power at the circuit breaker or fuse box.
- Remove the battery from the Smoke/CO Alarm with battery back-up.
- Press and hold the Test button on the alarm for a few seconds to trigger a test of both the smoke and carbon monoxide sensors.
Troubleshooting
If you experience any issues with your First Alert Smoke and Carbon Monoxide Alarm, refer to the troubleshooting section in the manual. Common issues include:
- Alarm not sounding during a test.
- Alarm sounding intermittently.
- Low battery warning.
Additional Resources
For more information about your First Alert Smoke and Carbon Monoxide Alarm, including manuals, tutorials, and FAQs, visit the First Alert website. You can also download the product manual and register your product online.
The First Alert Smoke and Carbon Monoxide Alarm is a reliable and effective way to protect your home and family from potential fires and carbon monoxide poisoning. By following the installation and setup instructions outlined in this manual, you can ensure that your alarm is working correctly and providing you with the peace of mind that comes with knowing your home is safe.
Important Safety Information
It is essential to remember that the First Alert Smoke and Carbon Monoxide Alarm is not a substitute for regular maintenance and inspection of your home’s heating and cooking systems. Always follow the manufacturer’s instructions for your heating and cooking systems, and have them inspected regularly by a qualified professional.
Downloads and Registration
To download the product manual or register your First Alert Smoke and Carbon Monoxide Alarm, follow these steps:
- Open any page in the Help Center.
- Click the search icon in the top right corner.
- Input your model number and select your product.
- Click Download to access the product manual and registration information.
